Site Content

---

1. Mixing of the Paint

        General appearance of the paint, NO 

        settling and NO separation NO 

         foaming, NO floatation.

        Check temperature of the shop floor.

        Mix the paint in barrel for 15-20 minutes

        by slow speed stirrer.

        Check settling

        Continue mixing for 15 minutes

        Check temperature of paint.

        Check viscosity

        Adjust viscosity if required by adding

        the thinner

        Install cleaned pump.

        Attach filter bag to the feeding pipe.

2. Paint flow

        Maintain regular paint flow.

        Paint should be in good flow from barrel

        to Paint Tray and from Tray to Barrel

        back.

        Check for the Foam generation and 

        avoid foam to transfer to coating rolls.

        Paint Temperature as mentioned in TC

        Place the baffle so that the return paint 

        does not get picked up any 

        contamination or foam.

3. PMT and OVEN TEMPRATURE SETTING

        Zone-wise oven setting.

        Maintain the temperature profile record.

        PMT strips Should be available during

        trial.

4. Paint Application in lab

       Check all the properties in Lab by 

       applying the paints in Lab.

       Check the Curing by PMT check.

       Curing & Paint adhesion by Solvent rub 

       mek test

       Pencill hardness

       Scratch test as per customer.